Methods for cleaning shower head

The shower is filled with water for a long time, and due to water quality and environmental factors, certain scale and impurities will be produced inside the shower. Scale and impurities accumulated to a certain extent may affect the comfort of your bath, and even damage the mineral stream shower head, so we should pay attention to proper maintenance of the shower heads.

 

 

How to clean the shower head?

 

1. The material needed to clean the rainforest shower head is white vinegar, which is also a kind of material that families often have. After we remove the shower, put it in a small basin filled with white vinegar and soak it for about two quarters. After soaking, brush it with a toothbrush. Then clean it with water; If there is hard water sediment, slice the lemon and scrub it.

 

 

2. Pay special attention not to use strong acid (preferably white vinegar) when cleaning the leaky shower head, so as not to cause corrosion to the shower surface. In order to ensure that the shower nozzle is not blocked, we need to thoroughly clean the shower nozzle every six months or less, so as not to worry about the sudden blockage of the crystal chakra shower head during bathing, which may affect your bathing mood.

 

 

3. In order to ensure the service life of the shower nozzle, we had better keep it not directly under the bathroom heater and more than 60cm away from the bathroom heater when installing, and often use a soft cloth to stick a little flour to wipe the surface of the hants shower head to make it still as new.

 

Matters needing attention in using shower head.

 

1. In order to ensure the durability of the portable shower head, please operate as softly and slowly as possible.

 

 

2. After using for a long time, if the water separated from the shower is found to flow irregularly and intermittently, it means that there are sundries blocking the water outlet. At this time, it is only necessary to gently touch the soft rubber at the water outlet of the fixed shower head by hand, and small sundries will be automatically washed out by the water.

 

 

3. Do not use strong acid when removing scale, so as not to cause corrosion to the surface of shower head.

 

 

4. The hot water supply side of the faucet is in a high temperature state. Please be careful not to let the skin directly contact the surface to avoid burns.

 

 

5. Do not use detergent containing particles such as cleaning powder and polishing powder or nylon to scrub the big shower heads.

 

 

6. As acid detergent can erode the electroplating layer, it shall not be used when cleaning. After using acid detergent, wash the brushed nickel shower head immediately and wipe it clean with a soft cloth.

 

The above is a detailed introduction of how to clean the shower head. When the shower nozzle in our home is used for a long time, it will feel that the water is getting slower. This situation is telling everyone that the pressure shower head in your bathroom should be cleaned up. I hope the cleaning skills written above can help everyone.